RENOLIT REFACE is a multi-layer film that was especially developed for flat metal facades, HPL-boards and aluminium coffers. With RENOLIT REFACE you can refresh the shell of a building quickly, cost-effectively, and durably. The weather-resistant film covers metal facades or facade elements like a second layer of skin and lets them radiate. The special stiffness of the film enables on-site application even in windy conditions without a problem. At the same time, RENOLIT REFACE is flexible enough to be applied around edges and corners. The products' "Air Release Technology" prevents the creation of air bubbles. Moreover, small positioning errors can be easily corrected as the film can be repositioned before the adhesive begins to harden.
A broad range of colours means that the appearance of a Building can be completely changed. In addition, the plotter compatibility of RENOLIT REFACE generates endless design opportunities.
With a film width of up to 1.5 metres, RENOLIT REFACE is perfectly dimensioned for almost all facade formats. The high perfromance film is highly fire-resistant and the satin-embossed, structured upper surface can also smoothen-out slightly uneven surfaces. And opposed to paint finishes, films have a consistent thickness.
The film's transparent acrylic protection layer and high-quality pigments give RENOLIT REFACE weathering resistance of at least ten years.
Thanks to our "Air Release Technology", RENOLIT REFACE can be applied bubble-free in one step. As a result of its low weight, the film is easy to apply in situ.
Renovations with RENOLIT REFACE are about 50% cheaper than exchanging facade panels. In addition, the film's durability and simple cleaning further reduce overall costs
The film's dirt-repellant PVDF surface simplifies cleaning because it hinders the adherence of dirt (Easy to Clean). Even graffiti can be easily removed.
Simple cleaning and excellent weathering resistance result in consitently low maintenance costs. Naturally, RENOLIT REFACE is free of solvents. And again: Because the facade panels can be reused, significantly fewer materials (metals) are used.
The formula of success behind the advantages such as durability, UV-stability and a stain-resistant surface is due to the multi-layered structure of the renovation-film.
Every single layer contributes to the advantages, which we are able to guarantee based on long-term tests and independent expert assessments.
Yes, we have to admit - maybe this seems too good to be true.
Convince yourself and find out more about the product. Under our section FAQ's we collected frequently asked questions and our answers.
RENOLIT REFACE is a calandered film.
Roll Width: 130 cm
Roll Length: 50 m
Roll Weight: ca. 25 kg
Roll Thickness : 160 µm incl. adhesive
Grammage: 180 g/m2
RENOLIT REFACE is suitable for inside and outside applications.
It is a high-performance acrylic adhesive with air release technology for bubble-free adhere.
The surface of RENOLIT REFACE is embossed and thus appears lightly structured.
RENOLIT REFACE has a silk-matt surface gloss at 60° ca. 8-12%.
Stock colours: depending on availability 1 week
Special colours: 6 - 8 weeks
Stock Colours: 65 m2
Special Colours: 400 m2
+10°C bis +30°C for the film
+10°C bis +40°C for ground temperature
The temperature resistance -30°C bis +80°C.
RENOLIT REFACE can be applied flat and smooth, lacquered or non lacquered surfaces, such as metal, aluminium or HPL.
Individual case examination is absolutely needed.
The average processing time is ca. 15 min. / m2 for 2 persons.
The following tools are required: felt squeegee, cleaner, primer, force measurement device high-quality cutter, tape measure, isopropyl-water mixture (70:30).
Water and dish soap.
Sealants cannot be pasted over. Thus, only use approved sealants.
For deep joint an application is not possible. For that case we offer a matching lacqure for colour adjustment.
Yes, we certify processors in all of Germany and recommend those.
Yes, RENOLIT REFACE can be removed.
RENOLIT REFACE can be applied after a specific training by RENOLIT.
Existing screws and rivets have to be exchanged.
We provide a guarantee of 10 years.
Yes, a desired colour is feasible, details must be discussed individually.
In order to reach a reduction of the surface temperature of about 10°C by IR reflecting elements RENOLIT REFACE colour tones are equipped with the so called SST Technology (Solar Shield Technology).
Even though, RENOLIT REFACE was developed to be permanently adhesive, the film can be removed from many substrates after heating the ground as well as the film itself.
The film is flame resistant (B1) of not flammable substrate.
Classification: C; d 0, s1 gem. EN 13501-1
The adhesive strength is higher than 15N/25mm after 24 hours.
No, there is no standard existing.
No, RENOLIT REFACE is to use as a finished product.
RENOLIT REFACE ist ein "manufacture" and therefore not in REACH. The raw material that RENOLIT REFACE consists of are REACH compliant.
RENOLIT REFACE is breathable towards steam with a SD value of 3,88 m
(explanation: SD=1 means open, SD=100 means not open).
Please find here our Customer Area for all registered RENOLIT REFACE customers and certificated partners.