RENOLIT ALKORPLAN Pro
Designed to protect buried structure in all eventualities. Is the system 5-in-1, fully bonded PVC membrane with special Super Absorbent Polymer
RENOLIT ALKORPLAN Pro system provides an outstanding sealing performance, recommended where concrete structures must be protected against:
-
Groundwater
-
Contaminants
-
Ground gases like radon.
Suitable for:
-
Baterproofing of foundations
-
Basements
-
Tunnels
-
Underground parkings
-
All other concrete constructions below ground level.
Redundant sealing system
When these membranes are used in combination with watertight concrete, a combined sealing system with high performance is formed.
Discover more about our new solution for underground works
Self-healing properties of RENOLIT ALKORPLAN Pro
Thanks to the Super Absorbent Polymer, RENOLIT ALKORPLAN Pro has self-healing properties.
In the unlikely event of damage to the membrane during installation, RENOLIT ALKORPLAN Pro will prevent any lateral migration of water between the membrane and the concrete.
The advantages of RENOLIT ALKORPLAN Pro
-
Water pressure resistance tested up to 5 bars.
-
Weather resistance. Rainwater proof.
-
Direct application to the stabilized and compacted soil.
-
Three ways of doing the overlaps: adhesive, tape strips or thermal welding.
-
Redundant sealing system as the membrane becomes one with watertight concrete.
-
High flexibility: in case of a crack in the concrete, the membrane will not be affected.
-
Self-compartimentation property: water cannot move.
-
Easy installation with just a minimal number of accessories.
Efficient system: 5 products in 1
-
No need of compartimentation joints.
-
No need of injection pipe.
-
No need of protection layers on top.
Geomembrane versions
The RENOLIT ALKORPLAN Pro system offers four different membrane versions, all available in thicknesses between 1.2 mm and 2 mm.
| Coloured membrane -C The mint green geomembrane is environmentally friendly and allows the incorporation of certain amounts of reworked material. |
Translucent membrane -T The translucency of the membrane improves the quality control of the installation by allowing a visual control of the overlaps. |
|
| Pre-applied To be installed before the concrete pouring of the ground slabs and walls, so that the fleece fibres get embedded in the fresh concrete. |
RENOLIT ALKORPPLAN Pro C | RENOLIT ALKORPPLAN Pro T |
| Post-applied * Can be also installed on the walls or ceiling after the concrete pouring thanks to the SAP included in the fleece. |
RENOLIT ALKORPPLAN Pro CS | RENOLIT ALKORPPLAN Pro TS |
* Post applied membranes can also be used as pre-applied for their self healing properties.
Easy to seal
The RENOLIT ALKORPLAN Pro membrane can be sealed very easily by mastic glue, by thermal welding or by using a RENOLIT ALKORPLAN Pro Band (butyl tape).
