The Galindo Storm Water Reservoir

    The Galindo Storm Water Reservoir

    The Galindo Stormwater Retention Tank in Barakaldo is a particularly important piece of infrastructure for the management of the local Galindo Stormwater Management System. Its function is to regulate and temporarily store the flow generated during rainfall events, enabling more efficient management of inflows into the system and improving its performance without interfering with the operation of the existing network, by capturing a large proportion of the surface runoff in the area for subsequent treatment, thereby preventing pollution of the estuary.

    The infrastructure is mainly underground, comprising a tunnel approximately 1.4 kilometres long, excavated using a roadheader in a densely populated urban environment, with a route designed to minimise surface disruption.

    The approximate cross-section dimensions are 23.6 metres on the crown perimeter and 11.6 metres in width of the base, which represents a considerable area requiring waterproofing along the entire length of the tunnel. In total, around 50,000 m² of geomembrane has been installed

    Given its dimensions and characteristics, one of the key aspects of the project has been to ensure the correct waterproofing of the entire tunnel cross-section.

    Proposed Solution

    A single waterproofing solution for the entire cross-section

    RENOLIT ALKORPLAN Tunnel C 35034, a PVC-P membrane with CE marking for the waterproofing of tunnels and underground infrastructure, was used for the waterproofing.

    One of the distinctive features of this project is that the same membrane was used on both the crown and the invert, ensuring continuity of the waterproofing solution throughout the entire cross-section.

    Adaptation to the conditions of the substrate

    In an underground project of this nature, the waterproofing membrane must be capable of adapting to the actual conditions of the substrate and maintaining its performance in the face of potential movements or deformations.

    This geomembrane has an elongation capacity of over 300 per cent. This characteristic provides an additional margin of safety for the system, allowing the membrane to accommodate any deformation of the substrate without compromising the continuity of the waterproofing.

    This adaptability is particularly valuable in this type of infrastructure, where the waterproofing must work in conjunction with the substrate and the tunnel lining throughout the infrastructure’s numerous operational cycles and its entire service life.

    Final Result

    A dual function for the waterproofing

    At the Galindo Stormwater Retention Tank, the waterproofing geomembrane performs a dual function, directly linked to the infrastructure’s purpose within the drainage network.

    On the one hand, once water from surface runoff reaches the stormwater tank, the waterproofing must ensure the structure remains watertight, preventing water loss into the ground. In this way, the water can remain stored and be subsequently managed and regulated in accordance with the needs of the sewerage network.

    On the other hand, the geomembrane must act in the opposite direction as a barrier against water coming from the ground, preventing any potential seepage from reaching the interior of the tank. This not only prevents the inclusion of water flows unrelated to the infrastructure’s intended operation and facilitates control of the volume of water the tank is required to manage, but also protects the concrete structures from the deleterious effects of infiltrating water, estending its service life.

    This dual function makes waterproofing a fundamental element of the system, not only to guarantee the tank’s watertightness, but also to ensure that its hydraulic performance meets the conditions for which it was designed.