About RENOLIT REFACE
RENOLIT REFACE is a multi-layer film that was especially developed for flat metal facades, HPL-boards and aluminium coffers. With RENOLIT REFACE you can refresh the shell of a building quickly, cost-effectively, and durably. The weather-resistant film covers metal facades or facade elements like a second layer of skin and lets them radiate. The special stiffness of the film enables on-site application even in windy conditions without a problem. At the same time, RENOLIT REFACE is flexible enough to be applied around edges and corners. The products' "Air Release Technology" prevents the creation of air bubbles. Moreover, small positioning errors can be easily corrected as the film can be repositioned before the adhesive begins to harden.
The Advantages of our Facade Film at a Glance
A broad range of colours means that the appearance of a Building can be completely changed. In addition, the plotter compatibility of RENOLIT REFACE generates endless design opportunities.
With a film width of up to 1.5 metres, RENOLIT REFACE is perfectly dimensioned for almost all facade formats. The high perfromance film is highly fire-resistant and the satin-embossed, structured upper surface can also smoothen-out slightly uneven surfaces. And opposed to paint finishes, films have a consistent thickness.
UV- AND WEATHERING RESISTANT
The film's transparent acrylic protection layer and high-quality pigments give RENOLIT REFACE weathering resistance of at least ten years.
EASY TO APPLY
Thanks to our "Air Release Technology", RENOLIT REFACE can be applied bubble-free in one step. As a result of its low weight, the film is easy to apply in situ.
Renovations with RENOLIT REFACE are about 50% cheaper than exchanging facade panels. In addition, the film's durability and simple cleaning further reduce overall costs
EASY TO CLEAN
The film's dirt-repellant PVDF surface simplifies cleaning because it hinders the adherence of dirt (Easy to Clean). Even graffiti can be easily removed.
Simple cleaning and excellent weathering resistance result in consitently low maintenance costs. Naturally, RENOLIT REFACE is free of solvents. And again: Because the facade panels can be reused, significantly fewer materials (metals) are used.
RENOLIT REFACE Film Structure
The formula of success behind the advantages such as durability, UV-stability and a stain-resistant surface is due to the multi-layered structure of the renovation-film.
Every single layer contributes to the advantages, which we are able to guarantee based on long-term tests and independent expert assessments.
Yes, we have to admit - maybe this seems too good to be true.
Convince yourself and find out more about the product. Under our section FAQ's we collected frequently asked questions and our answers.
Your Contact Person
FAQ - Product
Which type of film is RENOLIT REFACE?
RENOLIT REFACE is a calandered film.
What are the dimensions of a RENOLIT REFACE roll?
Roll Width: 130 cm
Roll Length: 50 m
Roll Weight: ca. 25 kg
Roll Thickness : 160 µm incl. adhesive
Grammage: 180 g/m2
Where can RENOLIT REFACE be applied?
RENOLIT REFACE is suitable for inside and outside applications.
What does the adhesive consist of?
It is a high-performance acrylic adhesive with air release technology for bubble-free adhere.
Which surface does RENOLIT REFACE have?
The surface of RENOLIT REFACE is embossed and thus appears lightly structured.
RENOLIT REFACE has a silk-matt surface gloss at 60° ca. 8-12%.
What delivery time can be expected?
Stock colours: depending on availability 1 week
Special colours: 6 - 8 weeks
Is there a minimum order quantity?
Stock Colours: 65 m2
Special Colours: 400 m2
FAQ - Handling
What is the processing temperature of RENOLIT REFACE?
+10°C bis +30°C for the film
+10°C bis +40°C for ground temperature
What is the temperature resistance of the film?
The temperature resistance -30°C bis +80°C.
Which substrates are tested and approved?
RENOLIT REFACE can be applied flat and smooth, lacquered or non lacquered surfaces, such as metal, aluminium or HPL.
Individual case examination is absolutely needed.
What is the average processing time on straigth surfaces?
The average processing time is ca. 15 min. / m2 for 2 persons.
Which tools are required?
The following tools are required: felt squeegee, cleaner, primer, force measurement device high-quality cutter, tape measure, isopropyl-water mixture (70:30).
Which cleaner is recommended after application of the film?
Water and dish soap.
What is about sealants?
Sealants cannot be pasted over. Thus, only use approved sealants.
In which cases do you provide lacquers?
For deep joint an application is not possible. For that case we offer a matching lacqure for colour adjustment.
Are there certified processors?
Yes, we certify processors in all of Germany and recommend those.
Is it possible to remove the film?
Yes, RENOLIT REFACE can be removed.
Can I apply the film by myself?
RENOLIT REFACE can be applied after a specific training by RENOLIT.
How is the handling with screws and rivets?
Existing screws and rivets have to be exchanged.
FAQ - Colours
What are the guarantees for uni and metallic colours?
We provide a guarantee of 10 years.
Is a request for a desired colour feasible?
Yes, a desired colour is feasible, details must be discussed individually.
With which technology are the colour tones of RENOLIT REFACE equipped?
In order to reach a reduction of the surface temperature of about 10°C by IR reflecting elements RENOLIT REFACE colour tones are equipped with the so called SST Technology (Solar Shield Technology).
FAQ - Technique
Is it possible to remove the film from substrates?
Even though, RENOLIT REFACE was developed to be permanently adhesive, the film can be removed from many substrates after heating the ground as well as the film itself.
How is the fire behaviour of RENOLIT REFACE?
The film is flame resistant (B1) of not flammable substrate.
Classification: C; d 0, s1 gem. EN 13501-1
How is the adhesion of the film?
The adhesive strength is higher than 15N/25mm after 24 hours.
Is a CE label required?
No, there is no standard existing.
Is a safety data sheet required?
No, RENOLIT REFACE is to use as a finished product.
Is RENOLIT REFACE REACH compliant?
RENOLIT REFACE ist ein "manufacture" and therefore not in REACH. The raw material that RENOLIT REFACE consists of are REACH compliant.
How ist the diffusion behavior of RENOLIT REFACE?
RENOLIT REFACE is breathable towards steam with a SD value of 3,88 m
(explanation: SD=1 means open, SD=100 means not open).
Customer Area RENOLIT REFACE
Please find here our Customer Area for all registered RENOLIT REFACE customers and certificated partners.