Our self-adhesive facade film RENOLIT REFACE may poses some questions:
How long does the adhesive persist? Is there a guarantee? Is the film fire approved?
All frequently asked questions we answered here in our FAQ's, arranged in the following order:
Feel free to contact our service team, if there are any questions left:
contact@ . renolit.com
RENOLIT REFACE is a calendered film.
Roll Width: 130 cm
Roll Length: 50 m
Roll Weight: ca. 25 kg
Roll Thickness : 160 µm incl. adhesive
Grammage: 180 g/m2
RENOLIT REFACE is suitable for inside and outside applications.
It is a high-performance acrylic adhesive with air release technology for bubble-free adhere.
The surface of RENOLIT REFACE is embossed and thus appears lightly structured.
RENOLIT REFACE has a silk-matt surface gloss at 60° ca. 8-12%.
Stock colours: depending on availability 1 week
Special colours: 6 - 8 weeks
Stock Colours: 65 m2
Special Colours: 400 m2
+10°C bis +30°C for the film
+10°C bis +40°C for ground temperature
The temperature resistance -30°C bis +80°C.
RENOLIT REFACE can be applied flat and smooth, lacquered or non lacquered surfaces, such as metal, aluminium or HPL.
Individual case examination is absolutely needed.
The average processing time is ca. 15 min. / m2 for 2 persons.
The following tools are required: felt squeegee, cleaner, primer, force measurement device high-quality cutter, tape measure, isopropyl-water mixture (70:30).
Water and dish soap.
Sealants cannot be pasted over. Thus, only use approved sealants.
For deep joint an application is not possible. For that case we offer a matching lacqure for colour adjustment.
Yes, we certify processors in all of Germany and recommend those.
Yes, RENOLIT REFACE can be removed.
RENOLIT REFACE can be applied after a specific training by RENOLIT.
Existing screws and rivets have to be exchanged.
We provide a guarantee of 10 years.
Yes, a desired colour is feasible, details must be discussed individually.
In order to reach a reduction of the surface temperature of about 10°C by IR reflecting elements RENOLIT REFACE colour tones are equipped with the so called SST Technology (Solar Shield Technology).
Even though, RENOLIT REFACE was developed to be permanently adhesive, the film can be removed from many substrates after heating the ground as well as the film itself.
The film is flame resistant (B1) of not flammable substrate.
Classification: C; d 0, s1 gem. EN 13501-1
The adhesive strength is higher than 15N/25mm after 24 hours.
No, there is no standard existing.
No, RENOLIT REFACE is to use as a finished product.
RENOLIT REFACE ist ein "manufacture" and therefore not in REACH. The raw material that RENOLIT REFACE consists of are REACH compliant.
RENOLIT REFACE is breathable towards steam with a SD value of 3,88 m
(explanation: SD=1 means open, SD=100 means not open).