RENOLIT EDGE are edge banding films with back side applied adhesion primer which are available uni-colored or printed.
Properties:
By means of an additional transparent film, the printed designs are protected against abrasion and solvents and are thus superior in quality compared to commercially available thin edge films.
Decor variants:
The assortment of different RENOLIT EDGE decors encompasses a comprehensive range of uni-colors or wood textures, which can be matched with the decor of the board materials.
Processing:
RENOLIT EDGE films are equipped with back side applied adhesion primer and are usually bonded on chip boards or medium density fiberboards by means of hot melt adhesives.
Dimensions:
RENOLIT EDGE films are available in thicknesses between 400 µ and 600 µ, and, depending on the thickness of the chip board, in widths between 19 mm and 36 mm.
