| TYPE: | Renoprop "Soft" Tear Seal | FINISH: | Gloss or Orange Peel,
Transparent or Colored
Tint or opaque | | THICKNESS: | 100 - 300 microns (4-12 mil) | TOLERANCE: | ± 3% | | WIDTH: | 101 - 1930 mm (4-76 inches) | TOLERANCE: | ± 1 mm
(unless otherwise requested) | | SHRINKAGE: | 140°C
Time: 15 minutes | TOLERANCE: | MD: ± 1.5%
CD: ± 1.5% | | SPECIFIC GRAVITY: | 0.90 - 0.95, dependent on color | | |
| PROPERTY | TYPICAL VALUE * | ASTM METHOD | | Tensile Modulus MD/CD: | 46,000 psi | D-882 Method A | | Coefficient of Friction: | 0.4 | D-1894 | | Weld Range (°C) | 133-145 °C | .25 sec, 1Kg min pull | Corona Treatment
(if requested) | 38 dynes | D-2578 | | Gloss Specular (45°) clear | Smooth | O.P. | | clear | 72% | N/A | D-2457 | white | | 20% | | | Opacity (230µ) black | | | | black | 100% | | D-985 | white | 87% | | | | * Typical opacity values determined with 230µ black and white orange peel film. Values will vary with film thickness and color. |
| Renoprop Opaque Tear Seal Film has been specifically designed for use with thermal contact, ultrasonic or impulse welding processes. It is suitable for perforation, folding, sheeting and stripping. |
Typical applications
Office stationery/document products
Ring binders, photo album wallets, business card holders, job-ticket pockets
To our knowledge the information contained herein is accurate. However, neither American RENOLIT Corporation nor any of its affiliates makes any warranty, expressed or implied, or accepts any liability in connection with this information or its use. This information is for use by technically skilled persons at their own discretion and risk and does not relate to the use of this product in combination with any other substance or any other process. This is not a license under any patent. The user alone must finally determine suitability of any information or material for any contemplated use, the manner of use and whether any patents are infringed. |
