PP Light-Block Banner

PP LIGHT-BLOCK BANNER FILM

 TYPE: Two-side opaque banner film FINISH: Matte white or colored
 THICKNESS: 3 - 12 mil (76 - 300µ) TOLERANCE: ± 5% Local
 WIDTH: 8 - 76 inches (200 - 1930 mm) TOLERANCE: ± 2 mm
(unless otherwise requested)
 SHRINKAGE: 120°C Oven
Time: 10 minutes
 TOLERANCE: MD/CD: 1.5 %
 SPECIFIC GRAVITY: various, depending on color; 1.0 for white  

 

 PROPERTY TYPICAL VALUE * ASTM METHOD
 Tensile Strength MD: 4,700 psi D-882 Method A
  CD: 3,700 psi D-882 Method A
 % Elongation MD: 1,500 psi D-882 Method A
  CD: 1,400 psi D-882 Method A
 Tensile Modulus MD/CD: 56,000 psi D-882 Method A
 % Opacity: 100 % D-985
 Gloss specular (45°) 11 D-2457
 Surface tension (if requested ≥ 38 dynes D-5946
 Cold Crack Temperature: -30° F D-1790
* Typical values determined with 200m (8mil) thick white film. Actual values will vary with gauge

PP Light-block banner film has been specifically designed for two-side printing, coating or application of adhesive lettering. It is suitable for sheeting, folding, sewing and grommeting. It is functional down to -30° F but should be acclimatized 24 hours before processing in summer, or three to four days in winter.

Typical applications:

  • Signage/banners
    One- and two-side printable, indoor and outdoor
  • Flexible Tags and Labels
    Luggage, nursery, tree, lumber

To our knowledge the information contained herein is accurate. However, neither American RENOLIT Corporation nor any of its affiliates makes any warranty, expressed or implied, or accepts any liability in connection with this information or its use. This information is for use by technically skilled persons at their own discretion and risk and does not relate to the use of this product in combination with any other substance or any other process. This is not a license under any patent. The user alone must finally determine suitability of any information or material for any contemplated use, the manner of use and whether any patents are infringed.

Roll Length Calculator
   Go to top | Homepage | Conditions of Use | Privacy Policy
   Copyright © RENOLIT AG 2008 - All rights reserved