RENOLIT MEDICAL POLYPROPYLENE
| TYPE: | Medical Grade Polypropylene | FINISH: | Gloss | | THICKNESS: | 75 to 300 microns in increments of 5 microns | TOLERANCE: | ± 4% Local | | WIDTH: | 130 mm to 1500 mm | TOLERANCE: | ± 2 mm
(unless otherwise requested) | | SHRINKAGE: | 190 to 250 microns @ 140°C
for 15 minutes | TOLERANCE: | MD: ± 1.5%
CD: ± 1.5% | | SPECIFIC GRAVITY: | .9 - .91 | REGISTERED: | DMF #9955 |
| PROPERTY | TYPICAL VALUE * | ASTM METHOD | | Tensile Strength | MD: >6000 psi | D-882 Method A | | | CD: >5500 psi | D-882 Method A | | Yield Strength | MD: >4000 psi | D-882 Method A | | | CD: >3500 psi | D-882 Method A | | % Elongation | MD: <1500% | D-882 Method A | | | CD: <1500% | D-882 Method A | | Bend Modulus | MD: 105,000 psi | D-747 | | | CD: 93,000 psi | D-747 | | Coefficient of Friction: | <1.0 | D-1894 | | Gloss Specular (45°) | >50% | D-2457 | | Haze | <25% | D-1003 | | Clarity | >5% | D-1746 | | Oxygen Transmission Rate | see table | DIN 53380 | | Mois. Vapor Trans. (MVTR) | see table | DIN 53122 | | CO2 Transmission Rate | see table | | | * Typical values were measured on 250µ (10 mil) film and can vary with film thickness. |
Medical Grade Polypropylene Film has been specifically designed for use with thermoforming, heat contact and impulse welding applications. It is suitable for stamping, perforation, folding, sheeting and sticking, and is ideal for pharmaceutical blister packaging and laminating. It should be acclimatized before processing. |
