ANTI-REFLECTIVE MATTE POLYPROPYLENE
| TYPE: | Anti-reflective matte | FINISH: | Smooth or Orange Peel | | THICKNESS: | (50 - 300 microns) 2-12 mil | ERANCE: | ± 3% | | WIDTH: | (101 - 1930 mm) 4-76 inches | TOLERANCE: | ± 1 mm | | SHRINKAGE: | 120°C Time: 15 minutes | TOLERANCE: | MD: 2% CD: 2% | | SPECIFIC GRAVITY: | .9 | | |
| PROPERTY | TYPICAL VALUE * | ASTM METHOD | | Tensile Modulus | MD: 18.000 psi | D-882 Method A | | | CD: 15,500 psi | D-882 Method A | | Tensile Strength | MD: 4100 psi | D-882 Method A | | | CD: 3400 psi | D-882 Method A | | % Elongation | MD: 1000% | D-882 Method A | | | CD: 1000% | D-882 Method A | | Coefficient of Friction: | < 0.5 | D-1894 | | Weld Range: | 150 - 162°C | .25 sec, 1Kg min pull | | Gloss Specular (45°): | 9% | D-2457 | | Haze: | 60% | D-1003 | | Clarity: | 0% | D-1746 | | * Typical values were determined with 122m (4.8 mil) AR-OP film with "full" AR effect and will vary with film thickness, surface texture and chosen level of anti-reflectivity. |
Renoprop AR Anti-Reflective Matte Polypropylene Film has been specifically designed for use with heat contact and impulse welding processes. It is suitable for stamping, perforation, folding, sheeting and sticking. It should be acclimatized before processing.
Typical applications:
- Office stationery/document products
Sheet protectors, photo album pages, document protectors - Archival storage products
Hobby and collector card multi-pocket pages, comic book sleeves, photo negative pages, coin holders - Disk/media cases
DVD & VHS over-wraps - Miscellaneous applications
Signage/banners (one- and two-side printable, indoor & outdoor)
To our knowledge the information contained herein is accurate. However, neither American RENOLIT Corporation nor any of its affiliates makes any warranty, expressed or implied, or accepts any liability in connection with this information or its use. This information is for use by technically skilled persons at their own discretion and risk and does not relate to the use of this product in combination with any other substance or any other process. This is not a license under any patent. The user alone must finally determine suitability of any information or material for any contemplated use, the manner of use and whether any patents are infringed. |